Temperature range of the Hot Chamber

+50°C to +200°C.

Temperature range of the Cold Chamber

-80°C to –10°C.

Temperature fluctuation under

stabilised conditions

+ 1°C temporally.

Temperature change rate for

thermal shock-tests

Up to 100ºC / minute.

Test Load

Maximum 20 kg

Stabilisation time with10 kg IC’s

> 15 Minutes

All figures are values obtained at an ambient temperature of +25ºC, cooling water temperature of +18°C and nominal voltage 400V/50 Hz, without test specimens, radiation or accessories.

Test space capacity

130 litres

Test space

480 x 660 x 410 mm      (W x D x H)

Overall dimensions

870 x 2350 x 1960 mm  (W x D x H*)

*2540 mm with spindle

Nominal voltage

400 VAC +6/-10 %, 3Ø+N, 50 Hz

Nominal power

Approximately 15 kW

Nominal current

Approximately 30 A

Mains protection on site

32 A (slow-blow fuse)

System protection class

IP 20

Plug

Cekon 32 A

Cooling water connection

Inlet R ¾” female thread.

Outlet R ¾” female thread

Overpressure 3 to 6 bar

Differential pressure > 2.5 bar

Water temperature up to +20 ºC

Consumption: maximum 1.5 m³/h
at Δt = 10°K

Acoustic pressure level

< 70 dB (A) measured in a distance of   1 metre from the front.

Weight

Compressed air connection

Approximately 950 kg

¼” AG

Refrigeration unit

Water-cooled, low noise fully hermetic refrigeration unit, continuous performance adjustment via electronic monitoring and control system.

Chloride free refrigerants are used in a hermetically sealed refrigeration cycle. Freon R404 A

Heating

Stainless steel elements with over- temperature protection.

Casing / Finish

Galvanized steel, resistant powder coating.  RAL9002 grey-white.

Door

Hinged onto left-hand side, lockable with window 300 x 300 mm.

Test space & Cradle

Stainless steel grade 1.4301.

Floor load 150kg/m²

Wire mesh shelf

Mesh width 8 mm.  Maximum load 4 kg per shelf.  Maximum 5 shelves.

Cradle

Drive via electromotor and ball bearing spindle

Lead through

Ø 50 mm with cap

Safety devices

Mechanical and electrical locking of the cradle when the door is opened.

Safety temperature limiter, hot and cold chamber.

Site services

Power supply

Cooling water connection for water-cooled units

E&OE